2003 Silverado Door Lock Transmitter Programming

Exit the transmitter programming mode.

2003 silverado door lock transmitter programming.

4 release the door unlock switch the doors will lock and unlock to confirm programming mode. Turn the ignition switch to the on position in order to exit the transmitter programming mode. 1 start with the ignition off hold down the power unlock button on the door panel. Press and hold the lock button and the unlock button simultaneously on one transmitter.

This step may take up to 30 seconds. Hold down the lock and unlock buttons on the transmitter simultaneously until the door locks and unlocks. 5 press and hold the unlock button and lock button simultaneously on one transmitter after a delay of 15 30 seconds doors will lock and unlock to confirm programming of that transmitter. Hold down the lock and unlock buttons on the transmitter simultaneously until the door locks and unlocks.

Press and hold the lock button and the unlock button simultaneously on one transmitter. 2 hold down the keyless entry transmitter lock and unlock buttons for 15 seconds. Release the door unlock switch. Your silverado will automatically cycle the locks as it did in step 2.

This step may take up to 30 seconds. Press the lock side of the power door lock switch on the door panel twice. Press the lock side of the power door lock switch on the door panel once.

Release power unlock button on the door panel. 6 repeat step number 5 for up to 4 remotes. Simultaneously hold down the lock and unlock buttons on your fob for 15 seconds. After a delay of approximately 15 seconds the doors will lock and unlock to confirm the programming of that transmitter.

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on northcoast keyless. The doors will lock and unlock to confirm the program mode. Program any additional remotes for repeating step 6 for each remote. Repeat step 10 for each additional transmitter including any existing nbsp transmitters.

Step by step how to programming instructions for a 2003 chevrolet chevy silverado 1500 2500 3500 keyless entry remote fob. Up to four remotes can be programmed. The locks will again.

The doors will lock and unlock to confirm the program mode. Turn the ignition switch to the on position in order to exit the transmitter programming mode. Turn ignition key on. After a delay of approximately 15 seconds the doors will lock and unlock to confirm the programming of that transmitter.

The following is a list of available programming options. Release the door unlock switch. The locks will cycle once. Exit programming mode by starting your silverado.